Communications Settings; E-Mail/I-Fax Settings - Canon CLC5151 Sending And Facsimile Manual

Communications Settings

This section describes the e-mail, I-fax, fax, and Memory RX Inbox settings.

E-Mail/I-Fax Settings

You can change the e-mail and I-fax transmission settings. The following settings are available.
NOTE
This mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iR
C4080i) is activated.
■ Maximum Data Size for Sending
Sets the maximum data size for outgoing e-mail messages and I-fax documents. If an e-mail message
exceeds this data size limit, it is split up into several e-mail messages before being sent. However, if an
I-fax transmission exceeds the data size limit, it is handled as an error, and it is not sent.
IMPORTANT
When sending an e-mail or I-fax document, you can set to divide the data before sending it if the size of
the data exceeds the maximum data size for sending.
NOTE
For information on dividing data before sending it, see "Specifying Destinations Using the New Address
Tab," on p. 2-2, and "Storing New Addresses," on p. 10-5.
■ Full Mode TX Timeout
Sets the time that elapses before sending operations terminate (automatically) if you do not receive a
notification e-mail message (MDN) from the recipient when you send an I-fax in the Full Mode.

Communications Settings

11
11-5