Frame Erase
This mode enables you to erase shadows and lines that appear when scanning various types of
originals.
The following three Frame Erase modes are available.
IMPORTANT
• Combinations of the three Frame Erase modes cannot be set. If you select one of these modes, the
previously set mode is cancelled.
• The Frame Erase mode cannot be used when sending a fax document in the Direct Sending or Manual
Sending mode.
■ Original Frame Erase
This mode erases the dark borders and frame lines that appear around the scanned image if the original
is smaller than the selected record size. You can also use this mode to create a blank border around the
edge of the scanned image.
■ Book Frame Erase
This mode erases the dark borders, as well as centre and contour lines that appear if you are scanning
facing pages in a book or bound original.
■ Binding Erase
This mode erases the shadows that appear on the scanned image from binding holes on originals.
4-5
Frame Erase
4