Canon CLC5151 Sending And Facsimile Manual page 395

2
Select [For Error Only], [On], or [Off].
● If you select [For Error Only] or [On]:
❑
Select [On] or [Off] for <Report with TX Image>.
<Report with TX Image>:
[On]: Part of the sent document is printed on the Send TX Report.
[Off]: The contents of the sent document are not printed on the Send TX Report.
❑
Select [On] or [Off] for <Report with Color TX Image> ➞ press [OK].
<Report with Color TX Image>:
[On]: Colour documents are printed on the Send TX Report.
[Off]: Colour documents are not printed on the Send TX Report.
[Report with Color TX Image] can only be set if [Report with TX Image] is set to 'On'.
NOTE
Even if <Report with TX Image> is set to 'On', the original will not be printed in the following
cases:
- If the first page of the original is colour, and <Report with Color TX Image> is set to 'Off'
- If the document was sent using the Encrypted PDF mode
● If you select [Off]:
❑
Press [OK].
The Send TX Report is not printed.
Specifying Report Settings
12
12-5