Canon CLC5151 Sending And Facsimile Manual page 294

7
10
10-8
Storing New Addresses
Enter the recipient's fax number using
and .
Details of each item are shown below.
[Pause]: Press to insert a pause of several seconds in the fax number that you are dialing.
If you insert a pause, the letter <p> is displayed between the numbers, and the
letter <P> appears at the end of the number. When dialing an overseas number,
insert a pause after the country code, and at the end of the telephone number.
(See "Pause Time," on p. 9-43.)
[Tone]: Press when you want to directly call an extension line that is connected to a PBX
(Private Branch eXchange) which accepts only tone signals. If you press [Tone],
the letter <T> appears. (See "Fax Information Services," on p. 7-9.)
Press to move the position of the cursor.
[ ] [ ]:
[Backspace]: Press to delete the last number entered.
[Space]: Press to insert a space between numbers.
[+]: Use to insert a country code. Press [+] after the country code, and before the fax
number.
[Option]: Press to specify the subaddress, password, ECM TX, sending speed, and type of
call settings. These settings are optional.
[R]: Press to use the R-Key. (See "Special Dialing," on p. 7-5.)
IMPORTANT
You cannot insert a pause or a space at the beginning of a number.
NOTE
If you enter a pause at the end of the number, the pause is always 10 seconds long.
- (numeric keys), ,