Addresses Obtained Via A Server - Canon CLC5151 Sending And Facsimile Manual

Addresses Obtained via a Server

You can store an address that is obtained by searching the directory listings on the network
using LDAP (Lightweight Directory Access Protocol) servers.
NOTE
• You may have to set up the LDAP servers beforehand, depending on the network environment.
• For more information on LDAP servers, see "LDAP Server Settings," on p. 11-50.
• The information that can be obtained through the LDAP server varies, depending on the installed
options, as follows:
- If only the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated:
names and e-mail addresses
- If only the optional Super G3 FAX Board is installed: names and fax numbers
- If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated and the
optional Super G3 FAX Board is installed: names, e-mail addresses, and fax numbers
1
Press
[Register New Address].
If necessary, see the screen shots in step 1 and step 2 of "Fax Numbers," on p. 10-6.
2
Press [Network Add. Book].
➞ [Address Book Settings] ➞ [Register Address] ➞
Storing New Addresses
10
10-27