Printing Reports Automatically; Tx Report - Canon FAX-L160 Reference Manual

Printing Reports Automatically

TX REPORT, RX REPORT, and ACTIVITY REPORT can be set to print
automatically.
■

TX REPORT

The default setting is <PRINT ERROR ONLY>.
1.
Press [Menu].
2.
Press [ ] or [
SETTINGS>, then press [OK].
3.
Press [ ] or [
press [OK].
4.
Press [ ] or [
press [OK].
5.
Press [ ] or [
then press [OK].
<PRINT ERROR ONLY>: Prints a report only when a transmission error occurs.
<OUTPUT NO>: Does not print a report. Press [Stop/Reset] to return to the
standby mode.
<OUTPUT YES>: Prints a report every time you send a document.
6.
Press [Stop/Reset] to return to the standby mode.
] to select <REPORT
] to select <SETTINGS>, then
] to select <TX REPORT>, then
] to select the setting you want,
Report Items
The following items are displayed in the Transmission Report:
●
JOB NO.: Job number
● MODE: Mode of transaction (G3 or ECM)
● NO.: Sequence number
●
DESTINATION TEL/ID: Name and number of recipient
●
START TIME: Date and time of transaction
● PAGE: Number of pages sent
● RESULT: Result of transaction, transaction duration
– OK: Transmission successful
– NG: Transmission failed
– STOP: Transmission manually canceled before completion
– MEM. FULL: Memory became full during transmission
– NO ANSWER: Call not answered
– PAPER JAM: ADF jam occurs during Manual TX
●
Error code: For descriptions of error codes, See "Error Codes," on
p. 8-15.
9-19