Table of Contents
Advertisement
Documents Are Not Being Received Correctly.
❏
Cannot receive documents automatically?
Is the Manual RX indicator on your operation panel on?
❏
Cannot receive manually?
Is there a document set in the automatic document feeder (ADF)?
Did you press
❏
Are the documents you receive of poor quality?
Is your toner cartridge running low on toner?
Is the other fax functioning properly?
❏
Cannot receive a confidential document in your confidential
mailbox?
Does the other party's fax support subaddress/password transac-
tions?
❏
Cannot poll another fax and receive its document?
Are you polling without a subaddress/password?
Chapter 15
If this indicator is on, press the button below Manual RX to turn
it off. (➞7-2)
You cannot receive with a document set in the automatic docu-
ment feeder (ADF). Remove the document and try again.
(➞15-2)
before you hung up the handset?
Start/Scan
When you hear a high pitched tone, press
hang up the handset. Review the procedure for manual receiving
with the optional handset kit installed on the fax. (➞7-7)
Remove your toner cartridge and rotate it 5 or 6 times to evenly
distribute the remaining toner and try again. If this does not
solve the problem, you should change the toner cartridge.
(➞15-17)
The sending fax usually determines image quality. Try copying a
document on your own fax. If the copy is clean then the other fax
has a problem. Call the other party and ask them to clean the
scanning glass on the other fax.
If the other party's fax does not support subaddress/password
transactions, you cannot receive confidential documents.
Make sure the other party knows the correct subaddress/
password for your confidential mailbox.
If the other party's fax is a Canon fax and can set a polling ID,
ask them to set the polling ID for 255 decimal or 1111 1111 binary.
Maintenance & Frequently Asked Questions
before you
Start/Scan
15-45
Advertisement
Table of Contents
