Table of Contents
Advertisement
3
Press Start/Copy to begin scanning for sending, or if you used speed dialling,
wait a few seconds for the FAX to begin scanning automatically.
•
•
•
•
You can register up to 20 different sending operations for memory sending.
•
The document is automatically deleted from memory after sending. This occurs even
if an error prevents complete transmission of the document.
Manual Sending Via the Handset
Manual sending via the handset allows you to talk to the other party before sending a
document. This method is useful if the other party must manually activate their fax
machine to receive a fax.
For this mode, you need to connect the optional handset or a telephone to your FAX
(
p. 2 5).
Follow this procedure to send a document using manual sending via the handset:
1
Make sure you have connected the optional
handset or a telephone to the FAX
(
2
Load the document, face down in the ADF
(
•
3
Press Hook.
•
7 6
Sending Faxes
If you do not want the FAX to begin scanning automatically after a few
seconds, disable the TIME OUT setting (
To cancel sending once dialling has started, press Stop then
(
p. 7 8).
If the number you are calling is busy, the FAX redials the number
automatically after a few minutes (
p. 2 5).
p. 4 3).
To adjust the resolution and contrast,
see pp. 7 2, 7 3.
You can also lift the handset instead of
pressing Hook.
p. 14 6).
p. 7 9).
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
TEL=
(Standby to scan)
Chapter 7
Advertisement
Table of Contents
