Memory Sending; Manual Sending Via The Handset - Canon FAX-L250 Getting Started

Memory Sending (5-18)

Memory sending is a quick and easy way to send a fax. The FAX-L250 scans the document
into its memory as it dials the fax number. If the line is free, the FAX-L250 begins sending the
fax as it scans the rest of the document.
1
Prepare the document and load it, face down, into
the Automatic Document Feeder (ADF).
¶ Once the document is loaded, the LCD
display shows the following:
¶ If necessary, you can adjust the resolution
and contrast. See page 5-13 for details.
2
Dial the other party's fax number.
3
Press START/COPY.

Manual Sending via the Handset (5-16)

If you have the optional handset or a telephone connected to your FAX-L250, you can send
faxes manually. This allows you to talk to the other party before sending the fax, which can be
useful if the other party uses a single line for both voice and fax transmissions.
1
Prepare the document and load it, face down, into
the Automatic Document Feeder (ADF).
¶ Once the document is loaded, the LCD
display shows the following:
¶ If necessary, you can adjust the resolution
and contrast. See page 5-13 for details.
2
Lift the handset and dial the number
3
If a person answers, you can converse normally.
When you are ready to send the fax, ask the
person to press the start button on their fax
machine, or set their fax machine to receive, then
press START/COPY on the FAX-L250 and hang
up.
The numbers in parentheses indicate the pages in the FAX-L250 Users's Guide on which you can find detailed information.
II-6
Currently used memory:
MEMORY USED
Current resolutian:
STANDARD
Standby to scan:
DOCUMENT READY
Ex: TEL= 9p5164886700
Currently used memory:
MEMORY USED
Current resolution:
STANDARD
Standby to scan:
DOCUMENT READY
LINE IN USE
Ex:
TEL=
TX
TX/RX NO.
0%
0%
2 887 0166
0012