Testing The Fax; Setting The Tel Line Type - Canon FAX-B840 User Manual

6 With the label facing outwards, insert the BJ cartridge
into the cartridge holder. Lower the cartridge lock
lever until you hear a click to lock the cartridge in
place.
The yellow post (BJ cartridge guide) should be visible through the slot.
The BJ cartridge tilts slightly to the left in the loaded position.
7 Close the printer cover.
If the AUTO TEST PRINT setting (see SYSTEM SETTINGS, p. 52) is set to ON:
The fax automatically prints a test page every time you insert a BJ cartridge.
• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.

Testing the fax

After you have assembled the fax, installed the BJ cartridge, and loaded the paper, you can make sure the fax is
printing properly by making several copies of a document (see p. 25).

Setting the TEL LINE TYPE

See pp. 14, 15 for the buttons on the operation panel.
1 Press [Function], then press [Start/Copy] twice.
2 Use [ ] or [
3 Use [ ] or [
4 Press [Stop].
Setting ends and the fax returns to standby mode.
12
] to select TEL LINE TYPE, then press [Start/Copy].
] to select the appropriate line type, then press [Start/Copy].
Ribbon
cable Guide rail
Round shaft
Circuit board
ROTARY PULSE