Manually Configuring Replication For An Ip Telephony Server Or Ip Telephony And Messaging Server - 3Com VCX V7000 Maintenance Manual

Manually Configuring Replication for an IP Telephony Server or IP Telephony and Messaging Server

Manually
Configuring
Replication for an IP
Telephony Server or
IP Telephony and
Messaging Server
This section provides instructions on how to manually perform database
replication for these two configurations:
Regional IP Telephony Server — An IP Telephony Server configuration
■
includes the Accounting Services, the Call Records Services, the Call
Processor, and the Authentication and Directory Services.
In this case there is only one "Region", the single site. One server is
designated as the Primary, and one is designated the Secondary.
Regional IP Telephony and Messaging Server — An IP Telephony and
■
Messaging Server configuration includes the Accounting Services, the
Call Records Services, the Call Processor, IP Messaging Services, and
the Authentication and Directory Services.
In this case there is only one "Region", the single site. One server is
designated as the Primary, and one is designated the Secondary.
For these configurations replication must be started manually with the
setupReplication script.
1 Perform the following steps on the primary and secondary servers.
a Login as root.
b Enter the following commands:
modfw -p oracle allow <IP address of eth0 for the other
server>
modfw -p oracle allow <IP address of eth1 for the other
server>
c Stop the VCX Authentication and Directory server.
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata stop
d Stop the Tomcat application.
./S70tomcat stop
Remember to perform these steps on each server (primary and
secondary).
2 On the primary server log in as cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
The script starts to run.
3 Enter the requested information.
91