3Com VCX V7000 Maintenance Manual page 240

240 A B: U
PPENDIX PGRADING
VCX S S
ERVER OFTWARE
At this point, you have upgraded the Authentication and Directory server
on Region 1 and Region 2, and you have stopped database replication in
both regions. The following steps upgrade the databases in each region,
set up replication in each region, and restart the Authentication and
Directory server in each region. You should still be logged in, as root, in
each region.
1 On the Authentication and Directory server in Region 1, upgrade the
Region 2 database by entering the following commands:
su - cworks
cd /opt/3com/VCX/vcxdata/bin
./upgradeVcxdata
The
Enter the VCX Site Identification i.e. Site Id:
appears.
2 Enter the Site ID for Region 2.
3 On the Authentication and Directory server in Region 2, upgrade the
Region 1 database by entering the following commands:
su - cworks
cd /opt/3com/VCX/vcxdata/bin
./upgradeVcxdata
The
Enter the VCX Site Identification i.e. Site Id:
appears.
4 Enter the Site ID for Region 1.
5 Set up database replication on Region 1 by entering the following
commands (you should still be logged in to the Authentication and
Directory server as cworks):
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
The replication setup script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter site ID configured for Region 1.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Enter the number of Master sites. To determine the number of Master
Sites associated with this office, use the listVcxdata command. See
Manually Configuring Replication for an IP Telephony Server or IP
F V7.1. V7.1.
ROM X TO Y
: prompt appears.
prompt
prompt
prompt