3Com VCX V7000 Maintenance Manual page 265

a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary IP Telephony server and the
secondary IP Telephony server.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Press Enter to accept the default.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary IP Telephony server.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
Enter the IP address of the Master Site. This is typically the IP address
of the secondary IP Telephony server.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter to continue. The script executes.
y
4 Enter the following command to exit the cworks account and return to
the root account:
exit
5 Stop IP Messaging, first on the primary IP Messaging server and then on
the secondary IP Messaging server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6 Obtain a copy of the
and place it in the
Telephony server and on the secondary IP Telephony server. The variable
indicates the version of VCX software (for example,
vcx-all-7.0.3c.tar)
appended to the version number.
7 Obtain a copy of the
place it in the
/opt/installtemp
server and on the secondary IP Messaging server.
Upgrading a Single-Site System With Four Servers
[1]: prompt appears.
vcx-softswitch-7.0.xc.tar
/opt/installtemp
that will replace version 6.0. The letter
vcx-ipmsg-7.0.xc.tar
directory on the primary IP Messaging
software upgrade file
directory on the primary IP
software upgrade file and
265
prompt
prompt
x
is always
c