3Com VCX V7000 Maintenance Manual page 172

172 A A: U
PPENDIX PGRADING
VCX S S
ERVER OFTWARE
a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary VCX server and the secondary VCX
server.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Press Enter to accept the default.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary VCX server.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
Enter the IP address of the Master Site. This is typically the IP address
of the secondary VCX server.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter to continue. The script executes.
y
4 Enter the following command to exit the cworks account and return to
the root account:
exit
5 Stop IP Messaging, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6 Obtain a copy of the
place it in the
/opt/installtemp
and on the secondary VCX server. The variable
VCX software (for example,
current version. The letter
Next, execute the following steps in the order listed:
Upgrade the primary VCX server. See
■
Server.
F V7.0 V7.1
ROM TO
[1]: prompt appears.
vcx-all-7.1.xc.tar
directory on the primary VCX server
vcx-all-7.1.3c.tar)
is always appended to the version number.
c
software upgrade file and
indicates the version of
x
that will replace the
Upgrading the Primary VCX
prompt
prompt