3Com VCX V7000 Maintenance Manual page 333

Table 19 VCX Version Information Commands (continued)
Command
vcx-showphone
softwareversion
vcx-showcomponents
vcx-showconfigtype
vcx-listversions
Table 20 lists miscellaneous system commands.
Description
Supports the following arguments:
devapp — Displays the version of application software
■
running on telephones connected to the system.
devboot — Displays the version of boot software
■
running on telephones connected to the system.
If neither argument is specified, the command returns both
the application software version and the boot software
version.
For VCX versions 7.1 and higher, when entered with no
arguments, displays a list of the components (and their
versions) which make up the currently active VCX software.
Optionally, you can use the argument
--version=<VCX-version>. When you specify a
version, the command displays the installed components that
match the specified VCX version.
Displays the type of VCX configuration running on the
machine. Possible returned values include:
all — Indicates the host system is running as an IP
■
Telephony and IP Messaging Server.
softswitch — Indicates the host system is running as an
■
IP Telephony Server.
ums — Indicates the host system is running as an IP
■
Messaging Server.
callserver — Indicates the host system is running as a
■
Call Server.
dataserver — Indicates the host system is running as an
■
Authentication and Directory Server.
bss — Indicates the host system is running as a Call
■
Records Server.
adhoc — Indicates the host system is running as a
■
dedicated Conference Server.
For VCX versions 7.0 and higher, lists all the versions of VCX
software installed on the machine. See
Versions.
Command Descriptions
Verifying Software
333