Enabling Server Logging - 3Com VCX V7000 Maintenance Manual

Managing the Accounting Service and the Authentication and Directory Service
Enabling Server
Logging
1 Log in to the server hosting the service using the root account.
2 Stop the service (see
3 Enter the following command to change directories:
4 Edit the acctxmlconfig.xml file or the vcxdataconfig.xml file, and enable
5 Start the service (see
SNMP Support
The files acctxmlconfig.xml (Accounting service) and vcxdataconfig.xml
(Authentication and Directory service) each have a setting to enable
server logging. This is used to control the common logging function,
which is shared with all Tier 2 and Tier 3 devices. This controls the logging
of various status, warning, and error messages in the server. For normal
operation, the default settings might be sufficient, but for trouble
locating purposes, the various error, warning, informational, and tracing
log levels can also be used.
To enable message tracing:
cd /opt/3com/VCX/<schema>/conf
For , enter
<schema>
for the Authentication and Directory service.
server logging.
Example:
<BES_COMMONLOGG_CONFIG>
<!-- Set Y or N to enable or Disable -->
<LOG_INFO LOG_FILE_PATH ="../log/" LOG_FILE_NAME="AuthServer"
LOG_TO_CONSOLE="Y" LOG_TO_FILE="Y" LOG_TO_SYSTEM = "Y"
LOG_TRACE_ON ="Y" LOG_INFO_ON ="Y" LOG_WARN_ON = "Y"
LOG_ERROR_ON = "Y" LOG_SYSTEM_ON="Y" LOG_TIME_INTERVAL="4"
LOG_TIMESTAT_ON="Y" NUMBER_OF_MSG="1000"/>
The logs are written to the directory that the service is run from:
/opt/3com/VCX/<schema>/log
The SNMP Common Agent, enabled by default, allows back-end server
recognition by SNMP MIB browsers such as Enterprise Management Suite
(EMS). If you suspect the SNMP Common Agent is not enabled, see the
following section, Verifying SNMP
Stopping a Service).
for the Accounting service or enter
acctxml
Starting a Service).
Support.
59
vcxdata