3Com VCX V7000 Maintenance Manual page 280

280 A C: U
PPENDIX PGRADING
VCX S S
ERVER OFTWARE
Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
Enter the IP address of the Master Site. If there are more than one
Master Sites, this question repeats until the number of master sites
specified in step b is reached.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter to continue. The script executes.
y
When the replication is complete, Multi-Master Replication Status is
reported as NORMAL. Do not continue to the next step on this server
until the replication is complete. Note that replication can take
approximately 20 minutes to complete.
f You can check the replication by entering the following command:
./checkReplication
6 Set up database replication on Region 2 by entering the following
commands (you should still be logged in to the Authentication and
Directory server as cworks):
cd /opt/3com/VCX/vcxdata/bin
./setupReplication
The replication setup script starts. Follow the procedure described in
step 5.
7 Once replication is complete and status is NORMAL on Region 1 and
Region 2, start the Authentication and Directory servers in each region by
entering the following commands while logged in as root:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
8 Start the Tomcat process on the primary Call server and the secondary
Call server in each region by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
F V6.0 V7.0
ROM TO
for more information.
prompt