3Com VCX V7000 Maintenance Manual page 220

220 A B: U
PPENDIX PGRADING
VCX S S
ERVER OFTWARE
In a four-server configuration, one pair of servers runs IP Telephony
■
server software; the second pair of servers runs IP Messaging server
software.
Follow the procedure in this section to upgrade the two-server
configuration, at a single site, from one version of VCX software (7.1.x) to
a later version (7.1.y).
Before you begin the upgrade procedures on the primary VCX server and
on the secondary VCX server, perform these steps.:
1 Log in as root on the primary VCX server and on the secondary VCX
server.
2 Stop the Tomcat process, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3 Ensure that database replication has no errors (see
then drop replication on the primary VCX server by entering these
commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary VCX server and the secondary VCX
server.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Press Enter to accept the default.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of the
primary VCX server.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
F V7.1. V7.1.
ROM X TO Y
[1]: prompt appears.
Preliminary Steps) and
prompt
prompt