Managing Authorized Snmp Station Access - 3Com VCX V7000 Maintenance Manual

Managing
Authorized SNMP
Station Access
You can use an SNMP management station, such as 3Com Corporation's
Enterprise Management Suite, to manage a VCX server. You must,
however, grant the management station explicit access to the VCX server
to enable the exchange of SNMP management and monitoring messages.
You can add and delete SNMP stations using the
cagManageAuthorizedStations
Note the following considerations:
The
■ vcx-reconfigure
management station authentication. Enabling management station
authentication allows you to specify up to four stations using
vcx-reconfigure
Authorized stations added through
■
or through EMS must be deleted through
cagManageAuthorizedStations
selectively remove one of these stations while running
vcx-reconfigure
to
vcx-reconfigure
cagManageAuthorizedStations
vcx-reconfigure
If you disable management station authentication while running
■
vcx-reconfigure
removed.
To allow an SNMP management station access to a VCX server:
1 Log on the VCX server you want to manage using the root account.
2 Enter the following command to change directories:
cd /opt/3com/VCX/bin
3 Enter the following command to start the manage authorized stations
script:
./cagManageAuthorizedStations
The script displays the following menu:
************Manage Authorized Stations Menu**********
*****************************************************
show :- Display existing authorized stations configuration
add :- Add a new authorized station

Managing Authorized SNMP Station Access

script.
script provides the option to enable or disable
.
cagManageAuthorizedStations
or through EMS. You cannot
(refer to the VCX Installation Guide for information
). Authorized stations added through
or EMS are not visible from
.
, all previously configured authorized stations are
63