3Com VCX V7000 Maintenance Manual page 84

84 C 5: M
HAPTER ANAGING
A
UTHENTICATION AND
8 Enter the site ID of the Master Definition site.
The vcxdata<site ID>backup.<version number>.tgz back up file located at
/opt/3com/VCX/auth/db/import/ is restored to the VCX Authentication
and Directory server database.
9 Enter the following command on the primary VCX Authentication and
Directory server to start replication:
./setupReplication
The
Enter the VCX Site Identification i.e. Site Id
appears.
a Enter the site ID of the Master Definition site.
The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
To determine the number of Master Sites associated with this office,
use the listVcxdata command. See
Schemas in a Region
b Enter the number of Master sites.
The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
c Enter the IP Address of the Master Definition site.
The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears. If the configuration includes more than one Master Site, this
question repeats until the number of master sites specified in a
previous question is reached.
d Enter the IP Address of each Master Sites.
10 Once the replication is complete, use the
command and verify the command returns NORMAL status.
11 Restart the Tomcat and the VCX Authentication and Directory services on
both the primary and secondary servers.
a Enter the following commands to change the directory and start
Tomcat:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
b To start the VCX Authentication and Directory server, enter the
following commands:
D S D
IRECTORY ERVICE ATABASES
prompt appears.
for more information.
Verifying the Number of VCX Data
./checkReplication
prompt
prompt