Configuration Upgrade Options - 3Com VCX V7000 Maintenance Manual

Configuration
Upgrade Options
The VCX v7.1 upgrade procedure creates one or more phone profiles
based on data configured for phones in the VCX v7.0 system, and assigns
each phone to the appropriate phone profile. However, the VCX
administrator should be aware of upgrade implications on the following
phone configuration settings:
Registration Interval — This setting specifies how often a registration
■
message is sent to the VCX server to see if it is active and to check for
updates to the phone configuration. The VCX v7.1 upgrade procedure
resets this parameter to the default value, 3600 seconds (one hour).
Date Time Display Format, Local Time Zone, various Ring Tones, Call
■
Fallback — The values for these settings are retained for individual
phones. However, these same settings are also configured in the
phone profile to which a phone is assigned. If the phone profile is
modified and reapplied, the profile values will override the phone
settings.
Refer to the VCX Administration Guide for more information on phone
profiles and configuration options.
Depending on your configuration, you may need to upgrade the
following VCX software components and configurations:
IP Telephony and IP Messaging server software
■
Supported on:
Single-site systems with two servers
■
Multi-site systems that include servers at regional offices, but no
■
branch offices
Multi-site systems that include servers at regional offices and
■
servers at branch offices that use local IP Messaging
IP Telephony server software
■
Supported on:
Single-site systems with four servers
■
Multi-site systems that include servers at regional offices and
■
servers at branch offices that use global IP Messaging
IP Messaging server software
■
Supported on:
Single-site systems with four servers
■
Overview of a 7.0 to 7.1 Upgrade 169