3Com VCX V7000 Maintenance Manual page 298

298 A D: D
PPENDIX OWNGRADING
Downgrading a
Multiple-Site System
(7.1 to 7.0)
VCX S S
ERVER OFTWARE
For VCX systems that are installed at multiple sites, upgrades and
downgrades must be performed using a specific sequence of servers, as
described in this section.
CAUTION: Back up all databases before beginning an upgrade.
Downgrading Regional Authentication and Directory Servers
If a downgrade is required on a regional Authentication and Directory
server, the procedure is the same as that described in
Single-Site System (7.1 to 7.0)
and Directory server contains a database schema for each region.
For each schema, you must:
Drop database replication
■
Restore the database from the backup file
■
Reestablish database replication
■
Downgrading Regional IP Messaging Servers
If a downgrade is required on a regional IP Messaging server, follow the
procedure described in
Downgrading Call Servers
To downgrade a pair of Call servers, perform these steps, first on the
primary server and then on the secondary server:
1 Log in as root and switch the VCX version using this command:
vcx-switchversion --manual 7.x
Example:
vcx-switchversion --manual 7.0.0c
The
vcx-switchversion
Stops VCX services
■
Changes a link to point to the requested VCX version
■
Issues a warning that databases must be restored
■
CAUTION: Do not reboot the system or restart VCX services until
databases have been restored. The VCX 7.0 version has been selected but
the databases still contain 7.1 versioned data. This combination will not
operate successfully.
2 Update the pointer to the configuration file using this command:
SetConfigFile /opt/3com/VCX/conf/VCXConfiguration.xml
with one difference. Each Authentication
Downgrading a Single-Site System (7.1 to
command:
Downgrading a
7.0).