Adding Primary And Secondary Authentication And Directory Servers - 3Com VCX V7000 Maintenance Manual

Adding Primary and
Secondary
Authentication and
Directory Servers
config accts pri=2 IpAddress=<IP address of secondary
accounting server>
config accts pri=2 LocalIpAddress=<IP address of call
processor>
config acctc use=true
5 The interface lists the IP address of the new Accounting server.
6 To exit the remoteCLI interface, enter:
exit
To add a primary Authentication and Directory Server using the
remoteCLI interface:
1 Log onto the server hosting the primary Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the remoteCLI interface:
./remoteCli -callprocessor
4 At the remoteCli prompt (>) enter:
config authc use=false
config auths pri=1 IpAddress=<IP address of primary
Authentication and Directory server>
config auths pri=1 LocalIpAddress=<IP address of call
processor>
config authc use=true
5 The interface lists the IP address of the new Authentication and Directory
Server.
6 To exit the remoteCLI interface, enter:
exit
To add a secondary authentication server using the remoteCLI interface:
1 Log onto the server hosting the primary Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the remoteCLI interface:
./remoteCli -callprocessor
4 At the remoteCli prompt (>) enter:
Configuring Accounting and Directory Services 147