Enabling And Disabling Groups - 3Com VCX V7000 Maintenance Manual

32 C 2: C
HAPTER ONFIGURING THE
Enabling and
Disabling Groups
Deleting Groups
C R S
ALL ECORDS ERVICE
You can enable or disable configured groups. A disabled group stops
collecting CDRs from member Accounting services. The CDRs are stored
on each server hosting an Accounting service and accumulate as long as
there is enough disk space.
When you create a group, it is enabled by default, However, the
VCX-supplied Accounting service group named defaultGroup, is in a
disabled state by default.
To enable or disable an accounting group:
1 Log on to the VCX server hosting the Call Records service as cworks and
enter these commands.
cd /opt/3com/VCX/bssxml/bin
./config.sh
A menu of configuration options appears followed by the SELECT
OPERATION prompt.
2 At the prompt, enter
Either the Enter the Group Name to Enable or the Enter the Group Name
to Disable prompt appears, depending on the state of the group. The
configured groups are listed above the prompt.
3 Enter the name of the group you want to enable or disable.
The Do you want to [Enable/Disable] this Group [y/n] prompt appears.
4 Enter either or
y n
The new state is applied to the group, and you are returned to the main
menu.
Once a group is deleted, all Accounting services that are configured to be
in that group are no longer associated with anything. Deleted groups will
no longer collect CDRs from the Accounting services. The CDRs are stored
on the servers hosting the Accounting services and will continue to be
stored on the servers as long as there is enough disk space.
To delete a group:
1 Log on to the VCX server hosting the Call Records service as cworks and
enter these commands:
cd /opt/3com/VCX/bssxml/bin
./config.sh
.
102
depending on the state you need the group to be in.