Section 6
Diagnostic Data
*NOTE: Dual Path Flow type meters only.
6.1
MAIN DIAGNOSTICS SCREEN
This is the main Diagnostics Data screen. It provides menus that show Flow, Application, Liquid, Site
Setup information. The Test Facilities menu provides test/control functions to optimize operation, analyze
application conditions and to recover system operation.
NOTE: Diagnostic Data menus on [Dual Path Flow] meter setups include [Path Select] and [Path
Enable]. Ch 1+2 Flow and Ch 1-2 Flow virtual Channel 3 menus only include [Flow Data],
[Print Setup] and [Data Site Created].
Flow Data
Application Info
Liquid Data
Site Setup Data
Test Facilities
Print Site Setup
Site Created
DIAGNOSTIC DATA MENU STRUCTURE (continued)
Print Site Setup
Site Created
Siemens
Real-time flow-related data
Path Select
Path Enable
Flow Data
Application Info
Liquid Data
Site Setup Data
Test Facilities
Print Site Setup
Site Created
Diagnostic Data
DIAGNOSTIC MAIN MENU DESCRIPTION
This menu shows flow rate, total & alarm data; adjustable flow limits.
This menu shows current meter operating status.
This menu shows current Reynolds # and RTD temperature readings (if this
system includes optional RTD Temperature measurement capability).
This menu shows current transducer setup data and signal status.
This menu provides system test and recovery routines.
This Menu cell allows you to send an ASCII dump of the current Site Data to a
RS-232 port device (e.g. a printer or laptop computer).
This menu cell shows date and time when the current site was created.
No
Yes
xx.xx.xx xx.xx.xx
Dual Path
1 and 2
N/A
No
04.18.01 13.24.01
6-2
CQO:1010PVXFM-3