Introduction To The Fuh1010Pvx Menu Screens; Typical Fuh1010Pvx Installation Menu Screen; Explanations Of Installation Menu Callouts - Siemens SITRANS FUH1010PVDX Operating Instructions Manual

Section 2

2.7.6 INTRODUCTION TO THE FUH1010PVX MENU SCREENS

This section introduces the FUH1010PVX Installation Menu as it appears on a communication program.
The Installation Menu consists of sub-menus, each providing individual menu locations (menu cells) that
store site data. For convenience, this manual refers to sub-menus simply as menus (e.g., the Pipe Data
Menu shown below). Note that the screen contains a left-hand column and a right-hand column. The left-
hand column shows the menu cells and the right-hand column shows the current data stored in the
adjacent menu cell.
[Site] indicates that this screen is from a
single-channel meter. A dual-channel model
shows either [Channel 1] or [Channel 2].
Menu Prompt Line
(Reverse Video)
Currently Selected
Menu cell
Menu cell
Left-hand column)
Current
Selected Menu
Current Selected Meter Type
Menu Prompt Line
Selected Channel
Currently Selected Menu Cell
Highlighted Data
Menu Cell
Menu Cell Data
Current Selected Menu
Siemens Site
Enter pipe Outer Diameter manually
Select Pipe Class
Select Pipe Size
Pipe OD (in)
Pipe Material
Wall Thickness
Liner Material
Liner Thickness
Flow
Pipe Data

TYPICAL FUH1010PVX INSTALLATION MENU SCREEN

EXPLANATIONS OF INSTALLATION MENU CALLOUTS

[Site] indicates Single Channel Flowmeter operating mode selected.
When you select a menu cell, a reverse text prompt appears on the
top of the screen to explain the function of the cell.
The [1] shows that measurement channel 1 is currently selected.
Selecting a menu cell causes it to highlight in the right-hand column.
The right-hand column shows the current value highlighted. Pressing
the <Right Arrow> provides access to an option list or numeric field,
where you can change the current value.
A menu cell is an individual location within a menu (in this case Pipe
data) that stores data (either a numeric entry or a list selection).
The right-hand column shows the current value stored by the left-
hand column menu cell. The Pipe Data menu includes option list items
and numeric entries.
The highlighted bar at the bottom of the screen shows the name of the
menu that you accessed (e.g., Pipe Data).
Currently active
measurement channel
[1] SITE1
Manual Entry
N/A
= 0.500
Steel
0.100
Menu cell data
None
(Right-hand column)
0.000 +Average
2-25
CQO:1010PVXFM-3
Site Name of currently
active site setup
Highlighted Data