The Test Facilities Menu - Siemens SITRANS FUH1010PVDX Operating Instructions Manual

Section 6
Siemens Dual Path
fx (drive)
N (burst length)
Ltn in
Vf max CU
Vs max m/s
Vs min m/s
Samples/Cycle
Max Damping
Min Damping
HF
Site Setup Data
If you decide not to use the [Automatic] selection, press any key other than <ENT> to abort the
operation.
6.6

THE TEST FACILITIES MENU

The Test Facilities menu provides commands for system analysis and recovery. The most useful for the
end-user is [Makeup] command. Using these routines under the supervision of our technical support
staff will help us to provide technical analysis and solutions.
NOTE: Force Transmit and Force Frequency functions are not displayed as menu cells in the Test
Facilities menu (see paragraph 5.4.8).
To start a Test Routine:
To scroll the cursor to the test routine press
To access the test option list press
To start the routine press
To end the routine press
4SS10G
29
5
5.316
Adjustment
>Automatic
1355.00
29
4
4
>-0.000
Siemens
Right arrow invokes an InProcess Makeup
Makeup
Tx Up
Tx Dn
Fixed ALC
Tx Up Fixed ALC
Tx Dn Fixed ALC
Test Facilities
ENT
Siemens
fx (drive)
N (burst length)
Ltn in
Vf max CU
Vs max m/s
Vs min m/s
Samples/Cycle
Max Damping
Min Damping
HF
Site Setup Data
Dual Path SITE1
No
No
No
No
No
No
. Press to move the asterisk to [Yes].
6-10
CQO:1010PVXFM-3
Dual Path 4SS10G
29
5
5.316
>Automatic
= 0.026
1355.00
29
4
4
>-0.026