How To Delete A Site Setup; How To Save/Rename A Site Setup - Siemens SITRANS FUH1010PVDX Operating Instructions Manual

Section 5
To scroll the option list to [On] press
the display screen.
Type your password on the PC keyboard, use numeric keys, or press
netic Wand to select the first character.
To move the cursor to the second character position press
Repeat the selection process for the second character. Continue this process until all the re-
quired characters (8 max.) appear in the field.
To store code press
exactly as described above.
Press . This moves the cursor to the [Site Security] option list.
ENT
To scroll the option list to [Site Security: On] press the
you must enter the correct code to turn it off.
To activate Site Security press

5.1.5 HOW TO DELETE A SITE SETUP

If you attempt to save a Site Setup when memory is full, the screen will show [Memory Full]. If you get
this message after issuing a Save/Rename Site command, you'll have to delete an unneeded Site Setup
to clear memory space. The Datalogger and Site Storage share a common memory pool, so a large
amount of logged data could also trigger the [Memory Full] message. For how to clear Datalogger
memory, see [Meter Facilities/Datalogger Control]. The Defragment Command may also secure more
memory (see Meter Facility/Memory Control Menu).
To delete a stored Site Setup:
To highlight [Delete Site] press
To access the Delete Site option list press
Move the cursor to the site name of the site setup you want to delete.
To delete the obsolete site setup press

5.1.6 HOW TO SAVE/RENAME A SITE SETUP

The Save/Rename Site command copies data from Active Memory to the Site Storage Memory. Saved
Site Setups can be recalled for future use. This menu cell allows you to save a Site Setup at any time
during the programming process. However, you must recall and complete the Site Setup in order to
achieve operation.
When you access the Save/Rename Site menu cell, the name of the most recently created Site Setup
(see Create/Name Site) appears automatically. If this name is acceptable, you can press <ENT> to save
the Site Setup. You can change the listed site name by following the procedure below. You may select up
to eight characters. If you decide to use numbers or a decimal point in the site name, you can also type
these characters directly from your PC keyboard.
ENT
. [Confirm Code ?] appears at top of the display screen. Retype code
.
ENT
.
ENT
5-5
then . [Enter Code?] appears at the top of
ENT
.
. Once you turn on Site Security,
.
.
CQO:1010PVXFM-3
with the Mag-