Setup Menu Structure; Baud Rate; Parity - Siemens SITRANS FUH1010PVDX Operating Instructions Manual

Section 5

Baud Rate

The [Baud Rate] menu cell sets the asynchronous serial transmission data transfer rate of the RS-232
port. It provides a selection of standard baud rates up to 38,400 baud. The selected baud rate must
match the baud rate setting of the receiving external device. The factory-set baud rate is 9600.
To change the Baud Rate:
To access the [Baud Rate] option list press
Move the cursor to the required baud rate by pressing
To store selection press

Parity

Parity is a simple method to check the accuracy of an asynchronous serial data transfer. The parity
setting tells the meter how to format the data words it sends to an external device. Parity is usually an
additional bit added to each data word. For example, if you select [EVEN], the total sum of all the bits in
a single data word (including the parity bit) will always be an even number.
The [Parity] option list includes all the standard parity settings for asynchronous serial transmission. The
selected parity must match the parity setting of the receiving external device. Some devices ignore parity
entirely; therefore, the option list includes [None]. The factory setting is [None].
RS-232 SETUP MENU STRUCTURE
RS-232 Setup Baud Rate
Parity
Data Bits
Line Feed
Network ID
RTS Key Time
. This moves the cursor to [Parity].
ENT
300
1200
2400
4800
9600
38400
None
Odd
Space
Even
Mark
7
8
No
Yes
xx (numeric entry)
0.2 Sec.
0.4 Sec.
0.6 Sec.
0.8 Sec.
1.0 Sec.
2.0 Sec.
3.0 Sec.
4.0 Sec.
5-78
CQO:1010PVXFM-3