Data Storage; Trend Measurements; Recording With Memory Cleared; Recording With A Partial Or Full Memory - AEMC 607 User Manual

4.20 DATA STORAGE

The Model 607 captures Trend measurements at a user specified interval.

4.20.1 Trend Measurements

The Model 607 stores the measurement of each of the inputs. In addition, the
user can define the storage rate and type of measurement.

4.20.2 Recording with Memory Cleared

When a recording starts, the power meter will continue to record until one of the
following occurs:
■ The memory becomes full.
■ A manual press of the REC button for > 2 sec is performed.
■ The battery voltage is not sufficient to keep the instrument powered.

4.20.3 Recording with a Partial or Full Memory

It is possible to have more than one recording provided as there is sufficient
memory. The duration of the additional recording will depend on the sample rate
of the recording, amount of memory left and type of recording.

4.20.4 Memory Filled During Recording Session

If the memory becomes full, the REC indication on the display will blink. It will be
necessary to download and erase the memory before a new recording can be
started.
4.21 DATAVIEW
1. Insert the USB drive that comes with the instrument into a USB port on
your computer.
2. If Autorun is enabled, an AutoPlay window appears on your screen.
Click Open folder to view files to display the DataView folder. If
Autorun is not enabled or allowed, use Windows Explorer to locate and
open the USB drive labeled DataView.
3. When the DataView folder is open, Double-click the file Setup.exe in
the root directory.
4. The Setup screen appears. This enables you to select the language
version of the setup program. You can also select additional install
options (each option is explained in the Description field). Make your
selections and Click Install.
5. Click OK to confirm setup. The InstallShield Wizard screen appears.
This program leads you through the DataView
complete these screens, be sure to check PowerPad when prompted
to select features to install.
6. When the InstallShield Wizard finishes installing DataView
screen appears. Click Exit to close. The DataView folder appears on
your computer desktop.
50
INSTALLATION
®
Clamp-On Meter Model 607 - User Manual
install process. As you
®
, the Setup
®