Configuring The Camera With The Camera Configuration Tool Plus (Cct+); Opening The Configuration Tool; Closing The Configuration Tool - Basler L800k User Manual

Configuring the Camera
4.1 Configuring the Camera with the Camera
Configuration Tool Plus (CCT+)
The Camera Configuration Tool Plus (CCT+) is a Windows
change the camera's parameter settings. The tool communicates via the RS-644 serial connection
in the Camera Link interface between the frame grabber and the camera. The tool automatically
generates the binary programming commands that are described in Section 4.3. You can
download the CCT+ software from the Basler web site at www.basler-vc.com.
It is assumed that you are familiar with Microsoft Windows and that you have a basic knowledge
of how to use programs. If not, please refer to your Microsoft Windows manual.

4.1.1 Opening the Configuration Tool

1. Make sure that the properties for the RS-644 serial port on your frame grabber are properly
configured and that the camera has power.
2. To start the CCT+, click Start, click All Programs, click Basler Vision Technologies and click
CCT+ (default installation).
During start-up, a start-up screen will appear.
If start-up is successful, the CCT+ will open. To familiarize yourself with using the CCT+, press
the F1 key and look through the online help file.
If an error occurs, the CCT+ is automatically closed after start-up.

4.1.2 Closing the Configuration Tool

Close the CCT+ by clicking on the
4-2
Draft
button in the upper right corner of the window.
™
based program used to easily
BASLER L800
k