Chapter 3 General Configuration and Monitoring
QAM RF Port Configuration
The QAM RF Port Configuration view shows RF Port Configuration parameters
from the Global QAM Configuration page. See the following screen.
Parameters
The following table describes the RF Port Configuration parameters.
Parameter
Card Index
Port Index
Encoding Type
Service Group ID
Channel Spacing
Modulation
Channel Output Level
Channel Symbol Rate
Port Control
Combined Channels
30
Description
RF port card index on a particular card.
Example: 1/2 indicates card 1, port 2.
RF port index on a particular card.
ITU standard.
Alphanumeric service group identifier.
The spacing between the channel center frequencies of different
channels.
QAM output selected (256 or 64).
QAM output. The range depends on other parameters.
Symbol Rate based on the QAM modulation and ITU standards.
Allows you to turn the port on or off.
Allows you to configure the port for single/dual/quad channels.
78-4025112-01 Rev H0