Table of Contents
Advertisement
Chapter 14 Secuirty Features
SFTP Support
For SFTP client and server, SSHv2 with DSA key is used as the security protocol.
SFTP client and server will be operational only after the DSA key is downloaded and
installed (firewall permitting for SFTP server) and provided the transfer mode is set
to SFTP (for SFTP client).
Note: By default, the firewall for FTP and SFTP is enabled and the default file
transfer method is set to FTP
GUI Changes for SFTP
The following GUI changes have been added for SFTP support.
System Tab Changes
1
System Configuration page now includes an option to select FTP or SFTP for file
download/upload.
2
Firewall Settings now include an option to enable/disable the SFTP port.
3
SSH Configuration page has been added to provide access to the new security
features. See screen below.
Generating a DSA Key
Overview
The RFGW-1 is shipped from the factory with SFTP disabled. To enable SFTP, you
will need the following:
FTP server to download the required DSA key
218
78-4025112-01 Rev H0
Advertisement
Table of Contents
Need help?
Do you have a question about the RF Gateway 1 and is the answer not in the manual?