Table of Contents
Advertisement
Chapter 3 General Configuration and Monitoring
QAM Card Configuration
The RFGW-1 has six QAM cards. Each card has two ports. Each port has four
channels. The following sections describe how to configure the QAM card.
Global RF Port Configuration
Global RF Port Configuration allows you to configure RF for every port. See the
following screen.
Parameters
The following table describes Global RF Port Configuration parameters.
Parameter
RF Port
Spacing
Modulation
Output Level
Symbol Rate
Combined
Carrier
28
Description
Refers to the RF port on a particular card.
Example: 1/2 indicates card 1, port 2.
The spacing between the channel center frequencies of different channels.
Refers to the QAM output selected (256 or 64).
Refers to the QAM output. The range depends on other parameters.
Based on the QAM modulation and ITU standards.
Allows you to configure the port for single/dual/quad channel.
78-4025112-01 Rev H0
Advertisement
Table of Contents
