Chapter 16 NGOD Specific Operation
Provisioning
This section provides information for provisioning the RF Gateway 1 for NGOD
operation.
Prerequisite configurations:
GbE input ports, including Video/Data IP address
QAM outputs
Channel Application Mode
Channel Application Mode
To Verify Channel Application Mode
Navigate to the Qams page.
1
Select the QAM channels and set the App Mode to NGOD.
2
Set the TSID appropriately
Result: App Mode is displayed for each output carrier.
NGOD Settings
Navigate to the System tab and from there to the NGOD configuration on the left
hand side of the tab.
RFGW-1 is Configured with the following NGOD Settings
VREP Version – This should be set to 2.
Region Name – This is the Region Name that this RFGW-1 belongs to.
Local Name – This is the local name of the RFGW-1. When the region and local name
is appended together, this identifies the RFGW-1 location.
238
78-4025112-01 Rev H0