Cisco RF Gateway 1 Configuration Manual page 103

12 Click the Download Release button to initiate download process.
Result: The RF Gateway 1 will FTP all necessary files (application & firmware)
from the upgrade server as dictated in the system release file.
Note: If download failure occurs, recheck the path and filename of the system
release file.
13 After the download process completes successfully, select Activate.
Result: The device automatically reboots to the new release.
14 Close the browser after the device begins rebooting.
A single previous system release is retained by the system after an upgrade. Once
the system release upgrade is activated from the GUI, the previously active system
release is retained as inactive. If the operator wishes to restore the inactive release at
a later time, a revert capability is available using the System/Release Management
web view.
78-4025112-01 Rev H0
Release Management
79