Table of Contents
Advertisement
Chapter 13 Encryption and Scrambling
Result: the following page is displayed.
4
Click Descriptor Rules.
Result: The Descriptor Rules table is displayed.
5
Click Add New ECMG Descriptor Rule.
Result: The rule is added to the table.
6
Click Apply to accept change or Reset to abort.
7
To make changes to any of the parameter settings, highlight and modify. Click
Apply to accept changes.
Removing a Descriptor Rule
Follow the instructions below to remove a descriptor rule.
1
Select the check box next to the rule you want to remove.
196
78-4025112-01 Rev H0
Advertisement
Table of Contents
