Table of Contents
Advertisement
Chapter 3 General Configuration and Monitoring
Result: The Update Success window is displayed.
4
Click OK.
Result: The time is displayed in the Current Time window.
Simple Network Time Protocol (SNTP)
When Synchronize With Server is set to Enabled, the RF Gateway 1 periodically
attempts to obtain network time from one of the SNTP servers specified by the IP
address on the Clock Configuration page. If communication with the SNTP server is
successful, the RTC and internal system clock are updated. If communication with
both SNTP servers fails the internal system clock updates with a value obtained from
the RTC. For the remainder of the synchronization interval, the system runs on its
own time independent of the RTC and network server. At the start of the next
synchronization interval, the system attempts to resynchronize with the network
time server and set its clocks accordingly.
To Set the SNTP server for RTC
1
Navigate to the System/Clock page.
Result: The Clock Configuration page is displayed.
2
Set Synchronize with Server to Enabled.
3
In the Main SNTP Server IP Address field, enter the IP address in xx.xx.xx.xx
format.
50
TP582
78-4025112-01 Rev H0
Advertisement
Table of Contents
