Cisco RF Gateway 1 Configuration Manual page 82

Chapter 3 General Configuration and Monitoring
Output Monitoring
The Output Monitoring page provides information related to how transport streams
on the input are bound to QAM resources on the output. The Details button under
the Input parameter provides additional information on the input stream associated
with a particular output session. See the following screen.
Parameters
The following table describes the Output parameters.
Parameter
Session ID
Type
RFGW QAM Channel
SRM QAM Channel
Output Bitrate
Status
GbE Port
Destination IP Address
UDP Port
Output
Input
58
Description
The ID of the output session.
Refers to Session Type (SPTS, MPTS, Plant or Data).
Output QAM channel for a particular session ID.
The channel identification for the SRM.
Output bitrate of a session.
Describes session status.

Unbound: The session is not active.

Bound: The session is active and bound to QAM resources on the
output.

Bad input: The input stream associated with this stream is invalid.
The GbE port of the input stream associated with an output session.
Destination IP address of the stream. For multicast streams, it is the
multicast address.
UDP port of the input stream associated with a session.
Refers to output program number, PMT PID, and PCR PID for a session.
Provides details on the input stream associated with an output session.
78-4025112-01 Rev H0