Table of Contents
Advertisement
78-4025112-01 Rev H0
1
Chapter 1
Introduction
Overview
The Cisco
RF Gateway 1 is a universal edge QAM (U-EQAM) device
®
that offers industry leading performance, and a standards-based
solution for video, data, and converged video and data deployments
requiring high density and maximum reliability.
Purpose
This configuration guide provides the necessary information to
configure the system using the web browser interface.
Who Should Use This Document
This document is intended for authorized service personnel who have
experience working with similar equipment. The service personnel
should have appropriate background and knowledge to complete the
procedures described in this document.
Qualified Personnel
Only appropriately qualified and skilled personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate,
maintain, and service this product. Otherwise, personal injury or
equipment damage may occur.
Document Version
This is the fifth release of this configuration guide.
1
Advertisement
Table of Contents
