Changing Device Settings; Configuring The Device Name - Cisco RF Gateway 1 Configuration Manual

Chapter 2 RF Gateway 1 Configuration Quick Start

Changing Device Settings

The general configuration settings of the RF Gateway 1 are categorized on the
Device Information page. This section provides information on changing the device
settings.
Note: Once a setting is entered and you click Apply, they become active. The
settings must be saved in order to preserve them in nonvolatile memory. Software
version 1.3.11 has an automatic save feature which allows applied database changes
to be automatically saved to preserve them in nonvolatile memory. Saved settings
will be retained after a reboot or power cycle. This rule applies across all RF
Gateway 1 settings.

Configuring the Device Name

To identify the RF Gateway 1, it is recommended that a unique device name be
assigned to the unit.
To Configure the Device Name
1 Navigate to the System/System Configuration page.
6 78-4025112-01 Rev H0