Table of Contents
Advertisement
QAM Channel Level Configuration
The QAM Configuration channel level view shows you QAM Channel
Configuration parameters from the Global QAM Configuration page. The following
illustration shows the QAM Channel Configuration screen.
Parameters
The following table explains the QAM Channel Configuration parameters.
Parameter
Card Index
Port Index
Channel Index
Encoding Type
Original Network ID
Transport Stream ID
Channel Mode
Channel Spectrum
Inversion
Channel PRBS
Stuffing
Channel Application
Mode
Channel Interleave
Depth
Channel PMT Rate
78-4025112-01 Rev H0
Description
Identifies the QAM card.
Identifies the RF port selected for the QAM card.
Identifies the channel number for the port on the QAM card.
Refers to the ITU standard.
Original Network Identifier.
Allows you to change the Transport Stream ID.
The Channel Mode can be normal, continuous or mute. The default
setting is always mute.
The spectrum can be configured as normal or swap.
Fills up stuffing packets with a Pseudo Random Binary Sequence. This
setting is recommended to enhance locking on a receiving device.
Allows you to choose the channel mode.
Allows you to choose the interleaving depth.
Default setting recommended.
QAM Card Configuration
33
Advertisement
Table of Contents
