Table of Contents
Advertisement
Chapter 2 RF Gateway 1 Configuration Quick Start
To Configure the Virtual IP Address for each GbE Port Pair for Port Pair Mode
1
Navigate to the System/IP Network page.
Result: The IP Network page is displayed.
2
In the GbE Data Port Mode field, select Dual Port Pairs.
3
In the Video/Data IP address field, change the address.
4
In the Redundancy Mode field, use the drop-down box to select Redundancy for
each port pair.
5
Click Apply.
6
Click Save.
7
Proceed to configure the four physical GbE Ports IP addresses.
To Configure the Physical GbE Ports IP Address and Subnet Mask
1
Navigate to the System/IP Network page.
12
78-4025112-01 Rev H0
Advertisement
Table of Contents
