Table of Contents
Advertisement
Stream Type (i.e., SPTS, MPTS)
Program Number
To Configure the Video Stream Map
1
Navigate to the Maps page.
2
In the tree menu, select Video Stream Map.
Result: The Stream Map Table is displayed.
3
Locate the rows corresponding to the desired Output QAM Channel.
Note: The RF Gateway 1 web pages use the notation "Card/Port. Channel" to
refer to individual carriers.
4
In the Destination IP Address field, enter the IP address.
78-4025112-01 Rev H0
WARNING:
The user is responsible for making sure there are no program number or
PMVs on a given carrier as well as making sure all replicated transport
streams have identical advanced settings. If not, the system may have to be
reset to default settings to recover.
Provisioning
85
Advertisement
Table of Contents
