Table of Contents
Advertisement
Chapter 3 General Configuration and Monitoring
QAM Annex and Frequency Plan Configuration
The annex setting applies to all carriers in the RFGW-1, including ITU-A (DVB), ITU-
B (open cable), or ITU-C (Japan applications). Mixed annex settings are not
supported.
Configuring the Annex
Follow the instructions below to configure the annex.
1
Navigate to the System/System Configuration page.
Result: The Device Information page is displayed.
Note: Changing annex settings resets the database to default settings.
2
In the QAM Encoding Type field, enter the annex setting.
26
78-4025112-01 Rev H0
Advertisement
Table of Contents
