Cisco RF Gateway 1 Configuration Manual page 79

Hide thumbs Also See for RF Gateway 1:
Table of Contents

Advertisement

The following illustration shows the Monitor/ Main page screen.
The Monitor/Input page provides MPEG transport stream specific information,
including information for each detected MPEG transport stream on the input. The
streams can be filtered and displayed based on the input port.
The following illustration shows the Monitor/Input screen.
Parameters
The following table explains the Input Monitoring parameters.
Parameter
Type
GbE Port
Destination IP Address
Source IP Address
78-4025112-01 Rev H0
Description
Refers to Stream Type (SPTS, MPTS, Plant or Data).
GbE port of the stream.
Destination IP address of the stream. For multicast streams, it is the
multicast address.
Source IP address of the stream. For multicast, it is 0.0.0.0
Monitoring the RF Gateway 1
55

Advertisement

Table of Contents
loading

Table of Contents