Table of Contents
Advertisement
Chapter 4 Table-Based Video Specific Operation
3
Configure the basic settings for a stream map.
Note: As you become an advanced user, basic and combined settings can be
configured simultaneously.
4
Click Show Advanced Settings.
Result: The Advanced Settings window is displayed.
5
In the Source IP Address field, enter the source IP addresses you want your stream
to listen to.
a
The default '0.0.0.0' implies don't care.
b 1 is primary
c
2 is secondary
d 3 is tertiary
e
4 is quaternary
Note: If the device detects a stream which matches any of these three, it will pass
it through.
6
In the Ignore UDP Port field, select True or False.
7
In the PCR PID Select field, the user can choose the following for MPTS streams,
From PMT
First detected
Note: We recommend selecting "From PMT".
94
78-4025112-01 Rev H0
Advertisement
Table of Contents
