Cisco RF Gateway 1 Configuration Manual page 76

Chapter 3 General Configuration and Monitoring
To access the following parameters, navigate to the System/System Configuration
page.
Parameter
Gratuitous ARP State
Gratuitous ARP Time
Dejitter Buffer Depth
Network PID
Insert Network PID
reference in PAT
Gbe Port CRC Alarm Set
Threshold
Gbe Port CRC Alarm
Clear Threshold)
Begin Scrambler Alarm
Debounce
End Scrambler Alarm
Debounce
52
Description
Enable/Disable the periodic sending of gratuitous ARP packets.
Amount of time between gratuitous ARP packets.
Provides the average packet delay through the dejitter buffer. Its
default value is 150 milliseconds and it has a range of 5-400
milliseconds. Note, the depth should be greater than PCR interval
+ network jitter.
Network PID range 1-8190 is available
Enable/Disable the insertion of network PID in PAT
Alarm set threshold range provided within a five second window
is 1- 4294967295
Alarm clear threshold range provided within a five second
window is 1- 4294967295
Begin Scrambler Alarm debounce range provided is 0-20 seconds
End Scrambler Alarm debounce range provided is 0-120 seconds
78-4025112-01 Rev H0