Table of Contents
Advertisement
Result: The Device Information page is displayed.
2
In the Device Name field, enter the device name (up to 16 characters supported).
3
Click Apply.
4
Click Save.
Configuring the Annex
The annex setting applies to all carriers in the RF Gateway 1, including ITU-A
(DVB), ITU-B (open cable), or ITU-C (Japan applications). Mixed annex settings are
not supported.
To Configure the Annex
1
Navigate to the System/System Configuration page.
78-4025112-01 Rev H0
Changing Device Settings
7
Advertisement
Table of Contents
Need help?
Do you have a question about the RF Gateway 1 and is the answer not in the manual?