Cisco RF Gateway 1 Configuration Manual page 268

Hide thumbs Also See for RF Gateway 1:
Table of Contents

Advertisement

Chapter 16 NGOD Specific Operation
Received>
An unknown message was received from the USRM
R6[<Worker Num>]: <IP Address of USRM> - Connection Timed out.
Now:<Now Time> LastMsgTime:<Last message time> Timeout:<Connection
Time Out>
No messages were received for a period of time. Last message time received is
mentioned in the log. Connection time out is also shown in the log.
R6[<Worker Num>] Closing connection for ERM:< IP Address of USRM>
There are 4 worker threads processing the ERM connections for a max of 4
different ERMs. This message indicates that a connection is being closed. Once a
worker thread has closed the connection, the worker thread will become
available for a new connection.
R6 GenIPSrvr:Got a new Accept:<Socket Num> from <IP Address>
A new connection was accepted.
R6[<IPAddress>] No worker available
All the 4 worker threads are in use and there are no working threads available to
process the connection from the USRM.
NGOD session timeout reached for sessionID = <Session Id>
Session Timeout on the session is reached and the session is closed.
D6State[<ERM Instance>]: ESTABLISH IP:<ERM IpAddress> SZ:<Streaming
Zone>
D6 connection is established. ERM instance number, there are 4 of them.
D6State[<ERM Instance>]: RECVOPEN IP: <ERM IpAddress>
Waiting for receiving an OPEN message from the ERM
D6State[<ERM Instance>]: SENDFIRSTKEEPALIVE IP: <ERM IpAddress>
Starting to send the First Keep Alive message.
D6State[<ERM Instance>]: RECVFIRSTKEEPALIVE IP: <ERM IpAddress>
Sent the first Keep Alive message, waiting to receive the First Keep Alive
message
D6State[<ERM Instance>]: INITUPDATE IP: <ERM IpAddress>
First update message is being sent to the ERM
D6State[<ERM Instance>]: ERRORNOTIFICATION IP: <ERM IpAddress>
There was an error during the message exchange with the ERM
244
78-4025112-01 Rev H0

Advertisement

Table of Contents
loading

Table of Contents